CYBER Trickzz

Thursday, 1 May 2014

How to Use Any Sim with Any Data Card Without Unlocking

Vansh Kumar Intertnet tricks , PC tricks

Hi friends Now a days we all use internet on PC using Data. Data card comes with specific carrier even if u want to use any other sim because of any reasons like costly plans , network problem etc but change. Due to copyright issues, We can't use any SIM card in modem other than specific carrier without unlocking the modem.

Today in this post in will tell you a How to Use any SIM with any modem without unlocking do that It's very simple Using Nokia PC Suit.

Requirement : Nokia Pc Suite Click Here

Step 1- Insert any SIM in modem. In my case, I have used Airtel Data Card.

Step 2 - Modem will show invalid SIM, just ignore message and close modem software.

Step 3 - Start Nokia PC Suite.

Step 4 - Go to Nokia Pc Suite -> Connect to internet option.

Step 5 - Click on Configure. Select your data card modem and assign operator APN setting.

APNs for Indian networks:

• Airtel: airtelgprs.com

• Docomo: TATA.DOCOMO.INTERNET

• Vodafone: WWW

• Idea: internet

• Bsnl: bsnlnet

Step 6 - Finish set up.

Step 7 - Now connect to internet through PC suite.

Step 8 - Wow your net is connected without unlocking the modem.

NOTE - Before proceeding, Make sure you have installed drivers of your modem!

DONE....!

ENJOY FRIENDS

THANKS FOR READING

Know More »

Wednesday, 23 April 2014

Bypass Phone SMS Verification Of Any Website Easily.

Vansh Kumar Intertnet tricks , Useful Tricks

Hi friends Most of the websites ask users to give their mobile numbers while subscribing or creating an account on their websites, But they may send lots of spam messages to these mobile numbers. Sometimes thats why you don't register on that websites. In some cases, you might not be able to verify your mobile number because your mobile phone may not working properly or you do not have a mobile device but you are free to browse internet and create accounts.

So Today in this i am posting the solution to all these scenarios is to use of free internet only.No matter whether it's verification message or something else. You are free to use this service for any other relevant task which is depending on messaging over mobile numbers.

Choose the websites given below to Bypass Phone SMS Verification of any Website

Free online SMS receiving websites

Receive SMS Online - The most popular and reliable website for online SMS verification, you get few numbers from different countries mentioned on this website which can be used on any website account verification process.

Receive SMS - Same as above with better user interface, allows you to receive SMS online on any number mentioned on this website, you can pick up an number and receive messages on that number easily.

Receive E-SMS Online - This service is recommended when you get problems while using above mentioned websites.

How to use ?

So lets Start ,

Step 1 - Pick up any available mobile numbers from these website, fill it on the website form where it is being asked to fill.

Step 2 - Generally all the websites who are asking for mobile numbers, verify the number by sending confirmation code on that number.

Step 3 - So you will get a confirmation code on the number you filled in registration process. To check the message, just click on the number or click on Read more in front of that number to read the message received on that number.

Step 4 - There may be plenty of other messages from other users, so find your ones.

Step 5 - Copy down the code and fill it properly on the website where you want your account as verified!

THIS IS FOR EDUCATIONAL PURPOSE ONLY ~~DON’T MISS USE IT~~.

IT’S DONE

ENJOY FRIENDS

THANKS FOR READING

Know More »

Check Remote Control Using Camera

Vansh Kumar Useful Tricks ,

Hi friends I am back with a new trick. Yesterday i struck with a problem (i.e) My TV remote is not working I replaced the battery of my remote but eventhough it is not working. Then i thaught that there would be some problem with my remotes circuit. I just tried to search for these problems online.

Unfortunately i came with a trick How to check my remote's control using mobile's camera. After doing this trick only i came to realize that there was some problem with my TV and not with my Remote.

So lets begin

Step 1 - Open the Camera on you mobile.

Step 2 - Then keep your remote's head near the camera.

Step 3 - Then press the remote's buttons you can see the light ray visible on your mobile's camera (If your remote is working)

How it works:

The 'Infra-Red' light that comes from a remote is usually invisible........ until viewed digitally.

Just look at a Digital camera LCD display whilst getting someone to use the remote aimed at the camera.

You should see little flashes of White light. This works best close-up, in a darkened room.

(You could also use a camcorder, and of course any mobile phone with a camera. Try it!)

IT’S DONE

ENJOY FRIENDS

THANKS FOR READING

Know More »

How to create a Partition without Formatting your PC/Laptops.

Vansh Kumar PC tricks , Useful Tricks

Hi friends You all know that windows 8 come with single partition due to which it creates some problems and you all know that there is not any other solution other then Formatting your windows with your data But Today in this Trick I will tell you solution How to make a partition on your computer/laptops without Formatting. It’s not complicated process, so you could Do it in just few simple and easy steps & I’m pretty much sure you will be able to do it.

Even the windows 7/XP user’s can also do it. It’s very useful trick.

So lets Start ,

Step 1 - Go to the ‘computer’. Right-click on it & click on ‘manage’.

Note: If you do not have ‘administrative rights’ or your account is limited. If so, then you will not be able to make a partition. So make sure that you have ‘administrative rights’

If you find a window popping up asking for ‘YES’ or ‘NO’. Click on ‘YES’.

Step 2 - The ‘Computer Management’ window will open. In there, you will find ‘Storage’. Under that you will be able to see ‘Disk Management’ thus click on it.

Note: It should take about 10 seconds to load, if it takes lot of time then immediately close the computer management or restart the computer and start over from step 1.

Step 3 - So when the ‘Disk Management’ window opens you will see there is 1 drive i.e. C-drive or another one before the C-drive called ‘system reserved’. DO NOT do anything on the ‘system reserved drive’.

OK! Now you could either create partition on ‘C-drive’ or if any other drive available. You can do this to any drive you want. Of course, depending on the space availability. I am using C-drive to demonstrate.

Step 4 - Right-click on the drive you want to create partition, in my case it is C-drive. A pop-up should come up, click on ‘Shrink Volume’.

Note: If you have a big hard-drive, it would take longer time. For instance, if your hard-drive is 1TB it can take up to 20 minutes. In case, it says ‘NOT RESPONDING’ don’t worry. Just be patient as it will respond.

Step – 5 Once the loading is done, a window should pop up. In here you can allocate what size your new drive will be. This completely depends on you. Under ‘Enter the amount of space to shrink’ you have to allocate the size.

Note: The allocation of size should be done in ‘Megabytes’ only. For instance,if you want to put 100 Gb, you could write it as 102400 = 100 Gb.(1GB=1024MB Means 1024*partition size you want)

Then click on shrink.

Note: This will take time depending on what size you have allocated.

Step 6 - Once it is done, you will find a new slot. Usually it is placed after the drive that you partitioned. The partition drive will show a ‘black bar’. Right-click on the drive with the black bar, a window should pop-up. Just follow the procedure. Keep clicking ‘NEXT’ until you find the bit where it says ‘Assign the following drive letter’. You could just leave it as it is or give any letter you want and then click 'Next'. On the next window just name the volume and make sure ‘perform a quick format’ box is checked. If you un-check it, then the procedure would be very long and leave the other bits as it is. After checking everything and then click 'Next' & then 'Finish'.

Wait for a bit and your new drive will be created. So close everything up and go to my computer & you should see your new drive ready for you to use

IT’S DONE

ENJOY FRIENDS

THANKS FOR READING

Know More »

Sunday, 20 April 2014

Finding IP Address Of A Website Using Command Prompt.

Vansh Kumar CMD Tricks , Intertnet tricks

Hi frends Today In this post i tell you to find Ip Address of any website using Command Prompt {CMD} . Using IP Address you can find location of the website server and do lot more stuff. In this trick i am using with Google but you can use this method to find IP Address of any website like twitter, facebook etc.

So lets Start ,

Step 1 - Go to Start > Type CMD and press Enter.

Step 2 - Now write Ping followed by website URL whose IP you want to find.

Step 3 - It will take less then a second and come up with the results as shown below.

IT'S DONE

ENJOY FRIENDS

THANKS FOR READING

Know More »

Tuesday, 15 April 2014

How to Increase your computer speed.

Vansh Kumar PC tricks , Useful Tricks

Hi friends Everybody uses PC/Laptops in the starting the speed is good but after sometimes the speed get slower day by day But Today in This post i will tell you useful trick in which your computer working faster than ever before. It’s true I am using it in my Laptop .

So Let's Start

Step 1 - Go to start, click run and then type “regedit”

Step 2 - Select "HKEY_CURRENT_USER”, then select control panel folder and after that select the desktop folder. Make sure you do it correctly.

Step 3 - You will see "registry setting" on your right hand side. After, select "menu show delay”, then right click on it and select "modify".

Step 4 - You will find "edit string option" where the "default value data is 400". Change the Value Data to 000.

Step 5 – Now just simply Restart your computer after completing the above process. You will notice a significant change in your computers’ speed!

IT’S DONE…..

ENJOY FRIENDS

THANKS FOR READING

Know More »

Monday, 14 April 2014

How to Add your Name in the Place of AM and PM in Taskbar.

Vansh Kumar PC tricks ,

Hi freinds Today I am going to tell you a trick How to add up your name in place of AM and PM beside time and make yourself to feel proud among your group of friends. This is very simple and cool trick….

So let’s start,

Step 1 - Go to taskbar click on “ Date and Time ” and then click on “Change Date and Time setting”

Step 2 - Now a pop will open in that click on “ Change date and time ’’

Step 3 – Again a pop up will come in that click on ‘‘ Change calendar setting ’’

Step 4 – Now switch to Time tab and Double Click on AM & PM and Replace it with your Name . and make the setting same as image given below. After writing your name on the place of AM & PM Click on Apply.

Note – Select Short time as hh:mm:tt and Long time as hh:mm:ss:tt

IT’S DONE

ENJOY FRIENDS

THANKS FOR READING

Know More »

Saturday, 12 April 2014

How to Use the Notepad as your personal diary.

Vansh Kumar PC tricks ,

Hi friends There are so many people which likes to Write a Dairys daily in there paper made dairies but i have a new way to write a dairy in your PC using notepad in which you don't have to remember the date it will write the date and time automatically on every use. There is a simple feature in Notepad that can make it work like a personal diary for you.

So lets Begin ,

Step 1 - First Open a Notepad.

Step 2 - Now write .LOG as the first line in the file, then press enter.

Step 3 - Now save the file as My Dairy and close it.

Step 4 - Open the notepad file now and you will find that the current date and time has been appended (put) at the end and the cursor is in the next line.

Type your notes and then save and close the file. Each time you open the file, Notepad repeats the process,that is it appends the date and time to the end of the file and places the cursor below it.